![]() I read something about 'betalink' or (something like that) that people were using to more securely hold down corners of rear carbon fiber spoilers that were not a perfect fit and wanted to pull up. Simply driving the car no more than 40mph is not an option. What next? I want something that is reversible and won't hurt the paint, but will hold better as the hot weather approaches. Unfortunately, after sitting in the sun in a parking lot for about an hour and driving 80 on the way home on the interstate, they moved again and did not look as good again. I took off all the tape, cleaned the surface on the inside of the splitter well, and put on a double size dose of the 3M mounting tape. At first, I took them off and found that they are actually separating on the splitter side vs the side that attaches to the lower bumper. they are well connected to the bottom via the 4 screws on each side that attach the bumper to the liner underneath. The heat seems to soften the adhesive on the tape, and when combined with the downforce, it wants to slide down a little and then does not look quite right after. This is especially true as the weather warms and at highway (or slightly higher ) speeds. 1 solid one all the way e sample picture below) from Exotics Tuning that I really like, but the adhesive tape is just not up to the task. The work that began with a single 3M engineer now spans decades and generations and all of it goes into each of our products developed for automotive OEM, like 3M™ Automotive Acrylic Plus Attachment Tape 06384.I've got some Carbon Fiber front splitters (one on each side vs. Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life developing adhesive products and technologies that help entire industries and individual businesses worldwide. 3M recommends the use of 3M™ Automotive Adhesion Promoter 06396 for tape-to-part adhesion with 3M™ Automotive Attachment Tape 06384 on all plastic parts such as RIM, TPO, PPO, PP and PC.īetter Science for Better Adhesion from 3M This tape is 1/2" wide for a broad range of applications. ![]() This proprietary branding technology is designed to help identification of 3M™ Acrylic Foam Tapes. The liner makes our tapes easy to identify and difficult to imitate. The 3M branded liner (PDF, 148 Kb) features a subtle 3M logo-marking to provide evidence to the customer that they are receiving the 3M quality they expect from their purchase. ![]() A red 3M branded liner provides easy one-piece release for efficient application. The black color of this OEM approved tape helps create sharp bond-lines. It is engineered for stress relaxation when exposed to high stress loads, and maintains bond-line aesthetics under normal stress loads. The viscoelastic foam core conforms well even to complex geometries. Our liner-side adhesive provides very high initial and final adhesion for automotive paint surfaces, including scratch- and mar-resistant paint systems The non-liner-side adhesive delivers excellent adhesion to plastic and metal surfaces commonly found in automotive trim and other components. 045" (1.12 mm) acrylic foam core with two different adhesives one for each side of the application. Conformable core for excellent wet-out Two Adhesives for Automotive Parts and Paint Systemsĭeveloped specifically for attaching exterior trim and other parts to automotive substrates, our 3M™ Automotive Acrylic Plus Attachment Tape 06384 (PDF, 319 Kb) features a. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |